HDMI to VGA Converter may become alternative of HDMI Display Emulator for headless PC

Most of stick PC including my Meegopad T-01 cannot be used without monitor (headless PC).  HDMI dummy plug (Display Emulator) must be necessary.

However,  HDMI to VGA Converter which is no use at present may become alternative of Display Emulator. I can access the monitor-less Meegopad T-01 by remote desktop with VGA converter.

Windows10 installed on Meegopad T01

Windows10 was released!!  I tried to install onto my Meegopad T01.

First, the upgrading from windows8.1 was performed.

About 2/3 of 32GB eMMC was used.

Display adapter and some devices were needed to be recognized manually as same as Windows 10TP.

Next, the clean instalation was done.  Windows10pro uses about 9GB of eMMC.

The volume label and the file index option couldn't be modified in windows10.  I wanted them but resulted in error.  However in Safe Mode, They can be modified.

Meegopad T01 can be supplied additional power via the data USB port

Meegopad T01 is very attractive.
From my experiences, at least 1.5A (5V) is necessary to boot OS (windows8.1).  OS doesn't start up on a low-ampere AC adapter.  However, T01 seems to be recieved power from another microUSB port (for DATA) additionally.  Then, dual low-ampere AC adapters can make T01 start windows8.1 at own risk.

Logitech diNovo Mini

Recently, I am using diNovo Mini again.  It was perchased about ten yaers ago but not in use for long.  It is very suitable to ECS LIVA or Meegopad-T01 because of its compact size and touchpad although Windows 8.1 Bluetooth Issue needs to be fixed. 

However, the battery of my diNovo mini is already dead due to its oldness.  According to here, this battery is compatible to NOKIA BLB-2 battery, then I ordered.  

Moreover, I maked a usb-charging cable (DC jack 1.4x3.4mm center positive).

 USB provides only 5V though the original AC adapter provides 8V.  But the battery seems to be charged with my usb cable.

second story

Meegopad T01 and windows10 TP

I bought a Meegopad T01 stick PC.

This stick PC is released without OS.  Correctly, non-activated windows8.1 is preinstalled.  Very manly, therefore very inexpensive.
Immediately, I tried to install windows10 TP claenly from DVD.  Some devices needed to be recognized manually with windows8.1 driver "光棍一号T01驱动.rar".

In my situation, the Wi-Fi conditions are unstable.  At present, it is hard for the daily use.